Toilet Repair Is More Complicated Than It Looks

DIY plumbing repairs may work for a while, but eventually, you need to address the underlying cause of any toilet problem. A simple DIY toilet repair can get messy, time-consuming, and very wet if you misdiagnose the problem or apply the wrong fix.

Call us at Just Right Plumbing, Heating & Cooling when your toilet leaks, overflows, does not flush, barely flushes, or continues running. We will address your plumbing issue immediately because we know how inconvenient a malfunctioning toilet can be.

plumber fixing the back of a toilet

Signs Your Toilet Needs Repair in Salt Lake City, UT

When you notice these signs, your toilet needs attention:

  • If flushing seems weak, slow, and does not clear the contents of the bowl, the rim jets—tiny holes under the toilet rim—may to clogged. The siphon hole on the bottom of the bowl also may be corroded with mineral buildup. The toilet float inside your tank may need adjustment.
  • Water around the bottom of the toilet indicates a leak from a broken seal or cracks in the porcelain.
  • If you need to jiggle the handle, your toilet may need a new flapper valve.
  • The fill valve may be worn if the toilet bowl does not fill after flushing.
  • An overflowing toilet typically indicates a clog.

You can count on Just Right to provide affordable, quality repairs and installations for a variety of plumbing equipment, including toilets, faucets, and bathtub and shower fixtures.

Toilet Repairs

Our plumbing pros at Just Right can help you choose a quality toilet with a strong flush and water-saving efficiency. Replacing your old toilet is a cost-effective alternative to frequent repairs.

However, there are signs you should consider replacement:

  • Cracked porcelain leads to leaks.
  • If your tank leaks, consider replacing the entire toilet. It makes better financial sense.
  • An older toilet that clogs frequently is ready for replacement.

Toilet Maintenance Tips

You can prevent common toilet problems by making maintenance a habit in your home. Avoid flushing wipes, feminine hygiene products, cotton swabs, and other paper items into your plumbing system, even if the labeling claims they are flushable. They are likely to clog your toilet or pipes.

Take a close look at your toilet. Inspect for wet areas or water accumulation at its base, the signs of a leak. Add a few drops of food coloring to your tank, wait about 15 to 30 minutes, and check the bowl. If the bowl contains colored water, your tank is leaking.

Test the valve that shuts off water to your toilet. Consider replacing it if it is rusty or resists movement.

How to Replace a Toilet Flange

Installing a New Toilet - Utah’s Trusted Choice for Toilet Replacement & Installation

How do you know when it is time to replace your toilet? Age is a significant factor when weighing repairs versus replacement. It may continue to operate after 20 years, but it also may waste water and cost you money. The U.S. Environmental Protection Agency (EPA) says toilets are the main source of water use in homes. Older, inefficient toilets that use more than six gallons per flush are a significant source of wasted water.

Homeowners from Salt Lake City to Park City count on Just Right for workmanship that prevents leaks, protects your flooring, and keeps your whole plumbing system flowing freely.

Our Step-by-Step Utah Toilet Installation Process:

Careful removal of the old toilet

We shut off water, drain the tank and bowl, and lift the unit without damaging surrounding tile. Any bolts or supply lines still in top shape are saved for reuse.

Setting a fresh wax ring on the flange

A perfectly centered seal keeps sewer gas out and stops leaks from ever reaching your subfloor.

Placing and anchoring the new toilet bowl

We lower the bowl onto the wax ring—no twisting, rocking, or over-tightening that could crack porcelain or Utah’s common ceramic tile.

Securing the tank (for two-piece models)

Rubber gaskets and brass hardware get tightened to factory specs so the tank never wobbles or grinds.

Installing a level, durable seat and lid

Stainless-steel hinges resist Utah’s dry air and daily wear, giving you long-lasting comfort.

Final pressure and leak tests

We reopen the supply valve, watch the tank fill, and perform several flushes to confirm every connection is watertight.

Why Choose Our Local Plumbers at Just Right Plumbing, Heating, & Cooling

You can trust our experienced SLC plumbers to assess and fix the problem quickly and correctly. They have seen it all while on the job, from clogs and cracks to failed flushing mechanisms. They will do their utmost to keep your bathroom as clean as possible while working on your fixture and ensure you are 100 percent satisfied with their work.

Just Right Plumbing, Heating, & Cooling is a trusted name for plumbing services throughout Utah. We specialize in hydro jetting, sewer repairs, drain clogs, faucet repairs, and other services. Call our leading plumbing company today for a free consultation.

plumber fixing the back of a toilet

What Makes Just Right Different?

Our plumbers are here to recommend solutions for your plumbing needs so you can make the right decision for your home.

Certified & Trustworthy

Our licensed plumbers and sewer technicians can handle any plumbing service you need.

Reliable

You'll get a heads-up when your plumber is on their way for your scheduled time. They'll walk you through any work to be completed and any questions you have.

Advanced Techniques

We offer a variety of smart and eco-friendly plumbing solutions.

Efficient

With our online scheduling tool, we can get you the help you need when you need it.